Springfield Loaded Model PX9109LP 45 ACP, $1035
GunReports.com Video: Conquering Low Light with Ken Hackathorn (Crimson Trace)
GunReports.com Video: Ruger Tactical Tips, Pistol Reload
Ruger MKIII6 Standard .22 LR
40 S&W Polymer Pistols: H&K, Glock, S&W Shoot It Out
Polymer-Frame DA/SA Pistols: FNH and CZ USA Compete
Polymer-Frame DA/SA Pistols: FNH and CZ USA Compete
Kel-Tec P11 9mm, $368
Glock G34 9mm
According to the manufacturer, the Glock pistol was the first "industrially manufactured handgun with high-tech polymer grips." The barrels and slides are coated with what Glock describes as a "high-tech surface refinement" that they call Tenifer. The benefits of this "carbonitriding" coating are not only corrosion resistance and reduced glare but also resistance to abrasion. Tenifer coating is highly rated on the Rockwell Cone hardness scale at 64 HRC.
Some Glock pistols are available with different color frames, but our G34 was basic black. The defining feature of the G34 was its long 5.3-inch barrel with polygonal rifling, covered by a slide that included a gaping hole just to the rear of the front sight. This relief measured approximately 1.75 inches long by 0.75 inches wide. Glock says that this serves to reduce stress on the frame. The dustcover beneath the slide was also longer, making room for a healthy sized accessory rail, which was molded into place. The schematic breakdown of the Glock pistol with magazine lists only 34 separate parts, 36 if you count the magazine insert at the base plate (part 32a), and the front sight blade, part number 16a.
Videos on GunReports.com!
38 Special S&W Snubnose Showdown: Whos the Top Dog?
Full-Size 1911s with Accessory Rails: Kimber vs. Double Star
When it comes to producing a Gun Tests evaluation, the process can be complicated by differences in operation. For example, a tight protocol, such as 9mm polymer pistols with 4-inch barrels and identical capacity, can challenge our test staff to master a different trigger for each gun. That won't be the case here, because the operational differences in these two guns are subtle, despite their vastly different cosmetics.
Our 45 ACP test guns were the Kimber Desert Warrior, $1441, and the Double Star DSC Combat Pistol, $1350. Despite having so much in common with the Kimber, the appearance of the DSC Combat Pistol could not have been further from that of the Desert Warrior. If you love the way your AR-15 "black gun" looks, the Double Star Combat Pistol provides a matching sidearm. Only the stainless-steel barrel hood and aluminum trigger broke up the understated color scheme. In contrast, the choice of color and the unusual grips found on the Desert Warrior set the gun apart from other 1911s. Officially, the color of the frame and slide were Desert Tan, but it could also be called khaki. The appearance of a lanyard loop at the bottom of the mainspring housing was also a distinctive touch.
To get started with the test, we first made sure each gun was lubricated. These are steel guns with a lot of metal-to-metal contact. We lubricated the slide and frame rails, the disconnector, the swinging link, each side of the hammer and along the outer surface of the barrel. The barrel lugs were lubricated by filling the matching wells beneath the slide with BreakFree CLP oil.
We began our tests by cleaning out the ammo closet, shooting each gun with a variety of rounds, including 200-grain lead semiwadcutters from Black Hills Ammunition. We then settled in at [IMGCAP(2)]our bench along the 25-yard line. Here we fired 10 round groups from a sandbag rest. Our test ammunition was Wolf 230-grain Copper FMJ with steel cases and non-corrosive primers, 200-grain JHP/XTP +P Hornady rounds, and Federal 230-grain Hydra-Shok JHP ammunition.
Our big question: Since the guns were essentially the same mechanically, would the statistical results be a dead heat? Or would our guns exhibit distinctly different personalities? Let's find out.