Pistols45

Kimber Custom Shop Raptor II 45 ACP: Where Does It Rank?

We’ve had a Raptor II for a while, waiting for a suitable matchup from several makers who have thus far failed to provide us with a similar product, so we finally chose to have a good look at this pistol all on its own. To give some idea of the variety of 1911s in the Kimber line, within just the Raptor’s “cage” there are seven variants. These include the Grand, Pro, and Ultra models in both blued and stainless, or a mix of the two colors. Ours is all blue, and carries a price tag of $1434. We did our testing right after having looked at a surplus CZ 9mm and a new Tokarev 9mm, and must say, compared to those, the Kimber is a thoroughly professional-grade handgun. Its price is nearly five times the price of the others, so one would expect a better gun. Let’s find out just how much better it is.

Kimber Custom Shop Raptor II 45 ACP: Where Does It Rank?

We’ve had a Raptor II for a while, waiting for a suitable matchup from several makers who have thus far failed to provide us with a similar product, so we finally chose to have a good look at this pistol all on its own. To give some idea of the variety of 1911s in the Kimber line, within just the Raptor’s “cage” there are seven variants. These include the Grand, Pro, and Ultra models in both blued and stainless, or a mix of the two colors. Ours is all blue, and carries a price tag of $1434. We did our testing right after having looked at a surplus CZ 9mm and a new Tokarev 9mm, and must say, compared to those, the Kimber is a thoroughly professional-grade handgun. Its price is nearly five times the price of the others, so one would expect a better gun. Let’s find out just how much better it is.

1911 Value Shootout: Standard GI, or Kimber Custom Eclipse?

A difficult question often posed to the staff concerns subjective aspects of the handgun. Is the Italian Beretta a better handgun than the U.S.-made pistol? Is the pinned and recessed Smith & Wesson revolver the better shooter than the modern slip-barrel revolver? Among those that seem to invite the most comments is the difference between GI 1911 pistols and the semi-custom factory pistols. By semi-custom we mean pistols with high-profile sights, a custom grade beavertail safety, extended controls, and claims of superior fitting in the barrel, bushing, and barrel hood. The plain old GI pistol that served without complaint in two world wars is seen as the underdog in such a match up. The GI pistol cannot possibly play on an even field with the modern enhanced 1911, can it? The answer is, it depends.It depends on what you are doing and what you expect from the pistol. How many shooters can take advantage of the advanced features, and how many of these shooters can shoot up to the pistols capabilities is the question. But there is also the bottom line, and the bottom line is often personal defense. Many shooters swear by the 1911 GI pistol and want nothing else. One of our raters is quick to point out he knows the 1911, and as much as a person can feel emotional attachment toward an inanimate object, he loves the 1911, including all its eccentricities.The 1911 is individual enough that hand-fitting can make a difference. The closer the tolerances, the less slop and the less eccentric wear on the pistol. On the other hand, the GI pistols were fitted well in the locking lugs and barrel bushing, and that was all that mattered for acceptable accuracy. One of our testers had a conversation with an importer regarding the Philippines-made pistols. The businessman did not like the raters review of a certain pistol. The importer noted that the rater liked the RIA pistols, but not another pistol brand with more advanced features. The importer noted that the pistols come off the same assembly line - or at least the same factory, and the more advanced pistol went on for special handling. Also, the more expensive pistol had more features - yet, our tester did not like it. Our tester replied that yes, the RIA was a fine GI pistol, mainly because what features were on the pistol were done well. The other pistol included more stuff, but it took more finesse and greater skill to fit a custom beavertail and ambidextrous safety, and the pistol with superior features just didnt come out as well, in the opinion of our testers.In other words, you may purchase a good GI-grade pistol on the cheap, but if you are going to obtain an advanced-grade 1911, then it may not be advisable to go cheap. So can the discriminating 1911 shooter be happy with either a bargain-basement 45 ACP or a customized factory pistol at three times the price? To answer a number of questions concerning the performance of the 1911 pistol, our South Carolina test unit obtained both a Rock Island GI pistol and a Kimber Eclipse Target II. There are plenty of other pistols that could have stood in for these choices - the High Standard GI pistol might have just as easily been selected as the baseline, or the Springfield Loaded Model as the advanced pistol. But, in the end, we wanted to know if the Kimber Eclipse II would so outshine the RIA GI that buying the more affordable handgun would seem like a waste of money. Or would the simplicity of the GI show us that spending more on the Eclipse was just spending more?

1911 Value Shootout: Standard GI, or Kimber Custom Eclipse?

A difficult question often posed to the staff concerns subjective aspects of the handgun. Is the Italian Beretta a better handgun than the U.S.-made pistol? Is the pinned and recessed Smith & Wesson revolver the better shooter than the modern slip-barrel revolver? Among those that seem to invite the most comments is the difference between GI 1911 pistols and the semi-custom factory pistols. By semi-custom we mean pistols with high-profile sights, a custom grade beavertail safety, extended controls, and claims of superior fitting in the barrel, bushing, and barrel hood. The plain old GI pistol that served without complaint in two world wars is seen as the underdog in such a match up. The GI pistol cannot possibly play on an even field with the modern enhanced 1911, can it? The answer is, it depends.It depends on what you are doing and what you expect from the pistol. How many shooters can take advantage of the advanced features, and how many of these shooters can shoot up to the pistols capabilities is the question. But there is also the bottom line, and the bottom line is often personal defense. Many shooters swear by the 1911 GI pistol and want nothing else. One of our raters is quick to point out he knows the 1911, and as much as a person can feel emotional attachment toward an inanimate object, he loves the 1911, including all its eccentricities.The 1911 is individual enough that hand-fitting can make a difference. The closer the tolerances, the less slop and the less eccentric wear on the pistol. On the other hand, the GI pistols were fitted well in the locking lugs and barrel bushing, and that was all that mattered for acceptable accuracy. One of our testers had a conversation with an importer regarding the Philippines-made pistols. The businessman did not like the raters review of a certain pistol. The importer noted that the rater liked the RIA pistols, but not another pistol brand with more advanced features. The importer noted that the pistols come off the same assembly line - or at least the same factory, and the more advanced pistol went on for special handling. Also, the more expensive pistol had more features - yet, our tester did not like it. Our tester replied that yes, the RIA was a fine GI pistol, mainly because what features were on the pistol were done well. The other pistol included more stuff, but it took more finesse and greater skill to fit a custom beavertail and ambidextrous safety, and the pistol with superior features just didnt come out as well, in the opinion of our testers.In other words, you may purchase a good GI-grade pistol on the cheap, but if you are going to obtain an advanced-grade 1911, then it may not be advisable to go cheap. So can the discriminating 1911 shooter be happy with either a bargain-basement 45 ACP or a customized factory pistol at three times the price? To answer a number of questions concerning the performance of the 1911 pistol, our South Carolina test unit obtained both a Rock Island GI pistol and a Kimber Eclipse Target II. There are plenty of other pistols that could have stood in for these choices - the High Standard GI pistol might have just as easily been selected as the baseline, or the Springfield Loaded Model as the advanced pistol. But, in the end, we wanted to know if the Kimber Eclipse II would so outshine the RIA GI that buying the more affordable handgun would seem like a waste of money. Or would the simplicity of the GI show us that spending more on the Eclipse was just spending more?

GI Pistols: Remington Leads, But It Isnt Exactly a GI Pistol

In today's market there seems to be a glut of 1911-type pistols. They run the gamut from inexpensive foreign imports with cast frames and parts to the most inexpensive examples of the gunmaker's art. John Browning's masterpiece has been widely cloned and copied — and arguably never equaled by any other design for pure fighting efficiency. The combination of a low bore axis that limits the recoil arc, a short, straight-to-the-rear trigger compression, well-placed controls, and a comfortable grip add up to unequaled human engineering. Coupled with a design that allows cocked-and-locked carry and unsurpassed speed to a rapid first-shot hit, the 45 ACP cartridge and good heft, the 1911 is a deadly efficient fighting tool.

A generation or so ago we cut up and modified GI 45s into what we thought were superior fighting pistols. Today, we have ready-made factory pistols that incorporate many of the features once found only on custom handguns. But the original GI type remains popular. The simplicity and utter reliability of the design cannot be faulted. The more bells and whistles, the more we have to go wrong with a pistol. Low-profile sights, simple controls, and uncluttered design are among the strong points of the GI-type pistol. In this report we tested two modern renditions of the GI 45, the Auto Ordnance and Regent, respectively. As a counterpoint, we located and tested an original GI 45, by Remington Rand. Finally, we tested a modern pistol that is basically a GI gun with slight upgrades as a comparison. The results were interesting and made for a valid comparison of the GI-type pistols.

Concealable Pistols: Foreign 9mms Vs. Domestic 45 ACPs

If Gun Tests' reader mail is any indication, the 9mm vs. 45 ACP debate is still a hot topic. Twenty years ago, the discussion might have been limited to arguing more rounds versus more effective ammunition. Whereas unexpanded 45 ACP slugs have an initial mechanical advantage — they measure about 0.451 inches across — the controlled expansion and fragmentation of modern 9mm ammunition has closed the gap in terms of terminal effectiveness. Still, questions about which round stops a fight the best will rage on, but for the purposes of this test of concealable handguns, our ballistic judgments will be limited to computing and comparing muzzle energies.

Instead, what we attempt to do here is resolve, in an admittedly small way, the classic gun-counter conundrum that readers constantly ask us about: When you're ready to plunk down hundreds or even thousands of dollars for a carry pistol, should you buy a simple-to-use polymer 9mm or a solid metal-frame 1911-style 45? This is such a personal decision that we know we cannot factor in all the variables that might come to bear, but in the broadest sense, the topic is worth tackling.

To represent the two calibers, we chose two lightweight 1911 45s. The $1076 Springfield Armory Lightweight Champion fires from a 4.0-inch barrel and offers an accessory rail. The $1662 Dan Wesson ECO also features an alloy frame but is smaller than the Champion. Barrel length was 3.5 inches. Standard magazine capacity for both pistols was seven rounds. To represent current 9mm technology, we acquired two high-capacity Caracal polymer pistols that are new to the scene. Imported by Steyr Arms from the United Arab Emirates, the Caracal F pistol was the larger of the two with a barrel length of 3.96 inches and magazine capacity of 18 rounds. The Model C, for Compact, operated with a 3.5-inch barrel and came with two 15-round magazines. Base suggested retail price for each model was $499, but our pistols had a $25 upgrade. Whereas both 1911s offered night sights, both of the Caracal pistols featured the Quick Sight system, wherein the rear sight was integral with the slide and its notch was located directly in front of the ejection port. There was a telltale cap on each Caracal where a traditional rear sight would be mounted.

Of course, the basic question the buyer has to resolve is whether he or she wants fewer big bullets or more smaller bullets. There are advantages to both strategies. But before you consider how the fight might end, we believe you should consider several other practical issues first, such as how a pistol carries and conceals, how well you shoot a particular handgun, and can you deliver an effective and fast first shot.

Before we get into the details, we wanted to note two points in particular. In terms of just plain old weight, everyone knows an empty polymer pistol like the Caracal is lighter than an empty 1911. But once loaded, it can end up being as heavy as a steel-framed 1911 45. Also, surprisingly, although the widths of high-capacity 9mm pistols have been shrinking, the 1911 still has the advantage of being narrower and easier to conceal.

In addition to evaluating our four main test guns, we wanted to further investigate the 9mm vs. 45 ACP question. Separately, we also shot two custom guns, the First 500 1911 45 from Cylinder & Slide and a custom-built Commander-sized 1911 chambered for 357 SIG. The Cylinder & Slide pistol was a replica of the first 500 Browning 1911 45 ACP pistols delivered to the military in the year 1911. Its basic feature package provided a backdrop illustrating the advances in sights, operational features, and weight reduction offered by our two test guns from Springfield Armory and Dan Wesson. The 357 SIG Custom Commander built by Ross Carter demonstrated the kind of power that can ultimately be produced driving a 9mm-sized bullet and showed how much weight could be saved by filling the magazine with 124-grain bullets rather than 230-grain slugs. Our impressions of those two firearms are included in an accompanying sidebar.

Little-Known 1911s: Remington And Taurus 45 ACPs Compete

In the gun world there's no shortage of 1911-type 45 autos. However, when an old company which made a few 45s during drastic times of national need around 1918 — but has made none since — brought out a fresh, U.S.-made 1911, it got our attention. Remington-UMC made a few 1911s long ago for WWI use, as did Singer Sewing Machine Co., and a few other companies. Remington apparently made something over 21,500 copies of the 1911 for WWI, and then quit — until now. After a very long wait we acquired one of the Remington Model 1911 R1 Enhanced 45 ACPs ($940 MSRP). We wanted a similar-priced gun to compare it to, so we went to another company not commonly known for producing 1911s, Taurus. Our test Taurus PT 1911 ($900 MSRP) was stainless, the only one we could get at the time. It had a forged slide and frame. Remington claims "precision machined" slide and frame, but we don't know if they began life as castings, forgings, or bar stock. At any rate, when we wrung ‘em out, this is what we found.

New 1911 45 Pistols For Less Than $1000: Ruger, Springfield, Magnum Research

The year 2011 marks the 100-year anniversary of the introduction of the John Browning's most successful pistol. The initial design was actually completed about 1907, but after acceptance by the U.S. Military some four years later, it became known as the 1911 and was chambered for 45 ACP (Automatic Colt Pistol).

To recognize this achievement, we found three affordable 1911-style 45s introduced in the year 2011. They are the Ruger SR1911 No. 6700 45 ACP, $799; Springfield Armory's $939 Range Officer; and the $799 Desert Eagle 1911G from Magnum Research. The introduction of yet another 1911 from Springfield Armory isn't surprising; the company has essentially built its formidable reputation on 1911 pistols. For Ruger and Magnum Research, however, these pistols are their first tries at producing 1911s.

All three models featured a 5-inch barrel on a full size frame offering a flat profile checkered mainspring housing below an enhanced grip safety. Thumb safeties were left side only. The front strap of each pistol remained smooth. Each pistol utilized an aluminum trigger that was lined at its contact surface and relieved to reduce weight. Only one gun, the Springfield Armory Range Officer, offered an adjustable rear sight. Only the Desert Eagle was fit with a full-length guide rod. The Ruger pistol alone was fit with three-dot sights and offered a noticeably taller magazine release button. Otherwise, these three pistols were nearly identical.

Besides their basic functionality, these pistols are interesting for another reason. They individually include advancements in 1911 design and finish that shooters of this time take for granted. To better illustrate some of these so-called advancements, we compared our test pistols to a 100th Anniversary, we shot them alongside a 100th Anniversary Limited Edition 1911 Government model from Cylinder & Slide (www.Cylinder-Slide.com). The retro-1911 is being built for production by Cylinder & Slide, Bill Laughridge's Fremont, Nebraska, custom house famous for the production of high-quality 1911 parts. On the outside of the current pistols, it is easy to see an improved grip safety, beveled magazine well, aluminum trigger adjustable for overtravel, oversized or ambidextrous thumb safeties, a lowered and flared ejection port, reduced mass hammer and high visibility sights both adjustable and low profile. Most of the upgrades that define the modern era 1911 were developed in the final quarter of the 20th century.

Today's features are supposed to help the operator shoot the gun faster, safer, and more comfortably, and those upgrades have become more economical. Not long ago, our test pistols would likely have sold in the $1400 range. The cost of high-quality 1911s first took a notable drop with the introduction of Computer Numerically Controlled (CNC) machining. This made accurately machined parts more abundant, reducing hand fitting.

Aluminum, Polymer, and Steel 45 ACP Semiautos Square Off

There is something reassuring about a big-bore pistol in the pocket or on the belt in a holster. Professionals going in harms way appreciate the design and power of a big-bore autoloader. So do armed citizens. These handguns are not for everyone, but for the shooter willing to practice and learn to control their recoil, these guns represent unprecedented levels of protection ounce for ounce. Those who purchase a light 32 ACP, 380 ACP, or 9mm often fire a magazine or two and slip the pistol in their pocket. Those who purchase the 45-caliber compacts are often serious shooters who practice diligently. For this reason, the shortcomings of the type are recognized and any problems come to light quickly.Big-bore handgunners demand reliability and a certain amount of accuracy from their choices. The most reliable are the compact handguns that had their origins in military designs. These include the Glock and the 1911. While considerable engineering was undertaken to modify the locking and unlocking sequence and spring technology is very important, in the end these handguns in all frame sizes rely upon the original design for much of their reliability and handling. The good features of the parent pistols, the Glock Model 21 and the Colt 1911, survive.We began this shootout with the premise of firing the Glock 36, the archetypical slim-frame single-column-magazine Glock against the Colt Defender, Colts smallest 1911. The matchup was deemed a classic, pitting the greatest example of downsized technology from both the blue-steel-and-walnut camp and the polymer-frame camp. However, we added a third pistol almost at the last moment because the Springfield Micro is in line with the others, but in terms of price it competes with the Glock-the Defender is by far the most expensive of the three. The new owner of the Springfield Micro protested that while he wanted a good small 45, he could not take a beating, meaning he could not take a hit to his wallet. He owns several other Springfield pistols, including a TRP, three Loaded Models, a GI, a LW Operator and a Champion Super Tuned. He knows the difference in performance between GI sights and Novak sights, but he needed a compact carry gun and Springfield quality appealed to him. The addition of the Springfield gave us another interesting dimension in comparison. We now had three compact pistols with polymer, aluminum, and steel frames. We can only say the shootout was interesting, and even our most experienced raters could not call this one until the last shots were fired.

Aluminum, Polymer, and Steel 45 ACP Semiautos Square Off

There is something reassuring about a big-bore pistol in the pocket or on the belt in a holster. Professionals going in harms way appreciate the design and power of a big-bore autoloader. So do armed citizens. These handguns are not for everyone, but for the shooter willing to practice and learn to control their recoil, these guns represent unprecedented levels of protection ounce for ounce. Those who purchase a light 32 ACP, 380 ACP, or 9mm often fire a magazine or two and slip the pistol in their pocket. Those who purchase the 45-caliber compacts are often serious shooters who practice diligently. For this reason, the shortcomings of the type are recognized and any problems come to light quickly.Big-bore handgunners demand reliability and a certain amount of accuracy from their choices. The most reliable are the compact handguns that had their origins in military designs. These include the Glock and the 1911. While considerable engineering was undertaken to modify the locking and unlocking sequence and spring technology is very important, in the end these handguns in all frame sizes rely upon the original design for much of their reliability and handling. The good features of the parent pistols, the Glock Model 21 and the Colt 1911, survive.We began this shootout with the premise of firing the Glock 36, the archetypical slim-frame single-column-magazine Glock against the Colt Defender, Colts smallest 1911. The matchup was deemed a classic, pitting the greatest example of downsized technology from both the blue-steel-and-walnut camp and the polymer-frame camp. However, we added a third pistol almost at the last moment because the Springfield Micro is in line with the others, but in terms of price it competes with the Glock-the Defender is by far the most expensive of the three. The new owner of the Springfield Micro protested that while he wanted a good small 45, he could not take a beating, meaning he could not take a hit to his wallet. He owns several other Springfield pistols, including a TRP, three Loaded Models, a GI, a LW Operator and a Champion Super Tuned. He knows the difference in performance between GI sights and Novak sights, but he needed a compact carry gun and Springfield quality appealed to him. The addition of the Springfield gave us another interesting dimension in comparison. We now had three compact pistols with polymer, aluminum, and steel frames. We can only say the shootout was interesting, and even our most experienced raters could not call this one until the last shots were fired.

1911 Range Showdown: Colt Has Heritage, but Places Third

When it comes to 1911-type handguns, most of us think of personal defense or tactical versions of the old warhorse; however, many are used for recreational shooting and informal target shooting. Recognizing that fact, our paper-punchers wanted to burrow down into the details of target-grade 1911 pistols to see what target sights, very tight slide-to-frame fit (some Army gunsmiths weld the barrel, slide, and barrel bushing to create a new standard of tightness, an option not available to most civilian shooters), and better trigger and barrel can produce in terms of accuracy. The goal was to choose which handgun was the most accurate and best suited for informal shooting and as a base gun for upgrades to more demanding competitions.

What we learned generally is that the primary advantage of such handguns are their adjustable sights. Adjustable target-grade sights allow the shooter to adjust his sights for a wide range of bullet weights. (The 45 ACP may be useful with bullet weights of 152 to 260 grains, but the 180- to 200-grain bullets are generally the most useful for target shooting.) Also, target-grade pistols offer a fine sight picture necessary for firing good groups at longer ranges.

We tested three target-sight-equipped pistols from Colt, Kimber, and Springfield. One was the Colt Gold Cup Trophy 05070X 45 ACP, $1050 MSRP, but which we found at a counter-retail price of $963. Kimber's Eclipse Target II was the next gun, priced at $1345 MSRP and counter price of $1160. The third gun of the trio was the Springfield Loaded Model Target P19132LP, MSRP $1069 and retail price $973.

We were lucky to be able to obtain two loads especially designed for accuracy, the Federal 185-grain full-metal-jacket semi-wadcutter and the Cor-Bon 230-grain Performance Match. We also used a handload worked up just for this project, using the Oregon Trail 180-grain SWC. With these rounds we used an established method to zero a pistol with adjustable sights. If the pistol is close to the zero you want from the factory, minimal effort is required to zero the sight. If not, more work is needed. First, however, the shooter must determine click values, which will vary from sight to sight. To measure click value for each gun, we took a good benchrest position and fired a three-shot group. Next, we clicked the rear sight wedge notch five clocks to the right, then fired another group. We then measured the amount of adjustment, allowing us to precisely calculate the exact number of clicks needed to zero the piece, or the exact movement made by a single click. It doesn't matter whether you do the vertical or horizontal clicks first, but both directions need to be measured.

Also, before we get into the guts of these guns, it's worth noting at this point that some target pistols get battered to death by firing full-power ammunition—an easily avoided problem. The oft-repeated advice of fitting a full-power Government Model recoil spring to the Gold Cup is a non-sequitur. The recoil spring is full power. It is the hammer spring that is clipped and lightened to provide less resistance so that the slide will cycle with lighter loads. The Gold Cup is also supplied with a second lightweight recoil spring. Hardball or 230-grain FMJ loads usually break 830 fps. It is possible to work up a load using a 185-grain bullet at 750 fps with a proper lightweight recoil spring. Naturally, a handgun sprung in this manner would quickly batter itself into a rattling wreck with hardball loads.

Polymer 45 ACP Pistols From SIG Sauer and Springfield

As recently as the September 2010 issue of Gun Tests, we referred to our evaluation of two similar 1911 45s as being something of a rarity. That's because the guns were essentially a different interpretation of the same design. More often, we compare a roster of test guns that, despite being of the same caliber and approximately the same size, end up demanding widely different skill sets to operate.

In this test we once again evaluate two closely related firearms chambered for 45 ACP ammunition. They are the $709 Springfield Armory XDM 45 XDM945BHC and the $712 SIG Sauer P250 45 Full Size 250F-45-BSS. Both pistols are full-sized guns with polymer frames and a barrel length of 4.5 inches. Each gun offers an accessory rail, low-mount sights, double-column magazines, and a measure of ambidextrous features.

On the surface it would seem that this was indeed another "apples to apples" test. But one noteworthy difference between the two pistols puts these guns in different categories, we believe. The trigger on the XDM 45 requires a takeup and press that was much shorter than that of the SIG Sauer P250 45. That was because the striker inside the XDM 45 is primed to a point just short of ignition by movement of the slide. However, the XDM 45 is categorized as a double-action pistol. This is based on the actions of pressing the trigger renders final compression and release of the striker. In a more obvious display of double-action form, the SIG Sauer operator has almost complete control of the ignition cycle. Pressing the P250's trigger rearward results in nearly a 1:1 ratio in terms of lifting the hammer and dropping it on the firing pin. Some shooters may find this difference too much to overcome, smashing our presentation as a test of similar guns. But as shown by the results of our rapid-fire tests, our staff found that both triggers could be operated quickly and effectively.

Our tests for accuracy were performed from a bench at the Top Gun of Texas indoor shooting range, www.topgunrange.com. We took full advantage of Top Gun's 20-yard bays and the slick mechanical target retrieval system recently installed by Action Target. Away from the heat and marauding showers in the Texas outdoors, we liked the privacy and safety afforded by the sizable ballistic barriers that separated us from other shooters. Accuracy testing was a slow-fire exercise, but we used an electronic timer to record our first shot and total elapsed times during our two action tests. Our first action test was performed from the 7-yard line with the shooter holding the gun in both hands and the front sight held at the lower edge of the shooter's peripheral vision. Our target was the IPSC-P (paper) targets from www.letargets.com. The action consisted of firing two shots to the body (a 5- by 9-inch rectangle A-zone), and one to the head. The head area measured 6.9 by 6.3 inches overall with a 4-inch-wide by 2-inch-tall A-zone, which on a human target terms would mask the eyes. We recorded ten separate runs.

In our second action test we wanted to know more about keeping the gun mounted in the hand throughout rapid fire. So, for this test the start position was with the gun directly on target held only in the shooter's strong hand. This meant our right-handed test shooter fired holding the gun with only the right hand. The IPSC-P target was placed 5 yards downrange and we concentrated on head shots only. Five runs of two shots each were recorded.

Test ammunition included 185-grain and 200-grain Hornady Custom XTP jacketed hollowpoint rounds. We also tested with the least expensive rounds we could find. They were Federal 230-grain FMJ rounds purchased for less than $17/50 from Walmart. Our action tests were performed using the 200-grain Hornady ammunition. Here's how we rated them:

Weirdness in the Ammo Market

As the holidays arrive and we all think about buying presents for our loved ones, I wonder if we’ll have any money left over...
alert("Hello! I am an alert box!!");