Revolvers

Snubbies, Holsters, Rifles and A Cartridge Shortage

I'm a long-time customer and would like to get three or more comparisons of 357 Magnum lightweight snub-nose revolvers. The index shows the captioned rifle being reviewed in November. When I go online for past reviews, I only find a 2007 review, and it was not from November, as stated in magazine. The Blackhawk GripBreak 421903BK holster seems like just the ticket for this coming year for those of us who are predisposed to reject Kydex and plastic holsters for reasons of them being ugly and inelegant. Problem is, no one has the GripBreaks. Check your Schmidt-Rubin for a possible Christmas present. Remove the buttplate and see if there is anything under it. Many original owners wrote a personal note or ID and hid it under the plate. - Winslow

Downrange: Bad CHL News Come February 1

In a startling move, Virginia Attorney General Mark Herring announced on December 22 that Virginia will sever concealed handgun permit (CHP) reciprocity ties with 25 of 30 states. This will affect hundreds, maybe thousands, of Gun Tests readers who reside in Tennessee and other states bordering the Commonwealth, and perhaps millions of people nationwide.

Effective Feb. 1, 2016, — about the time this issue arrives in your mailbox —Virginia will no longer honor carry permits from the following states: Alaska, Arizona, Arkansas, Delaware, Florida, Idaho, Indiana, Kansas, Kentucky, Louisiana, Minnesota, Mississippi, Montana, Nebraska, New Mexico, North Dakota, North Carolina, Ohio, Pennsylvania, South Carolina, South Dakota, Tennessee, Washington, Wisconsin, and Wyoming. The following permits will continue to be recognized: West Virginia, Michigan, Oklahoma, Texas and Utah. The move also means several states will no longer recognize Virginia's concealed-carry permits because they require mutual recognition of permits. Those include Florida, Louisiana, North Dakota, Pennsylvania, South Carolina, and Wyoming.

Speaking about this audit and update, Attorney General Herring said, "Virginia, and nearly every other state in the country, have recognized that carrying a concealed handgun is a significant responsibility that should be extended only to those who have gone through a process to prove a level of competency and responsibility."

"The standards for proving competency and responsibility are up to each state," Herring said, "and the General Assembly has established Virginia's standards for whom it considers capable of safely carrying a concealed handgun. Those standards should be applied evenly, consistently, and fairly to anyone who wants to lawfully conceal a handgun in Virginia."

2015 Guns & Gear ‘A’ List

Toward the end of each year, I survey the work R.K. Campbell, Roger Eckstine, Austin Miller, Ray Ordorica, Robert Sadowski, David Tannahill, Tracey Taylor, John Taylor, Rafael Urista, Ralph Winingham, and Kevin Winkle have done in Gun Tests, with an eye toward selecting guns, accessories, and ammunition the magazine's testers have endorsed. From these evaluations I pick the best from a full year's worth of tests and distill recommendations for readers, who often use them as shopping guides. These choices are a mixture of our original tests and other information I've compiled during the year. After we roll high-rated test products into long-term testing, I keep tabs on how those guns do, and if the firearms and accessories continue performing well, then I have confidence including them in this wrap-up.— Todd Woodard

California Bans Advertising of the Sale of Handguns

California has argued that a provision of California Penal Code section 26820 enacted in 1923 prevents the displaying of any "handgun or imitation handgun, or placard advertising the sale or transfer thereof" anywhere in or on their store that can be seen outside their store by passersby.

Ruger Introduces 45 Auto-45 Colt Redhawk Revolver

Sturm, Ruger & Company's new Ruger Redhawk revolver is chambered to shoot both .45 Auto and .45 Colt cartridges. Designated as Model Number 5032, the new gun's suggested retail is $1029.

Smith & Wesson Pro Series 686 SSR No 178012 357 Magnum

In the December 2014 issue, Contributing Editor Roger Eckstine did an in-depth look at two guns designed to compete in the Stock Service Revolver division of IDPA.

Ruger GP100 Match Champion 357 Magnum Revolver Review

Ruger GP100 Match Champion No. 1754 357 Magnum, $899
The Ruger GP100-series revolvers are different from the Smith & Wesson 686s, but both guns were introduced to provide more durability than previous models.

The Ruger GP100 replaced the Security Six revolver in about 1986 with innovations such as stronger lockup built into the cylinder crane rather than at the tip of the ejector rod. Another feature that adds strength to the GP100 design is the lack of side plates in the construction of the frame.

(Gunsmithing Pistols and Revolvers #4) Cold Blue

Cold bluing, or chemical bluing, is used to touch-up slightly worn or nicked blued finishes. It is suitable for covering up the holster wear on the muzzle of a revolver, or a spot on a slide where your sweat lifted the blue. It is not nearly as durable as a hot-dip blue finish. Some cold-blue formulas contain sulfides, and a handgun that has been touched-up too much can have a very alight, but noticeable, smell of rotten eggs. Sniffing a used firearm, to see if there has been any use of cold blue to hide wear, is an old trick in the gun business.

(Gunsmithing Pistols and Revolvers #5) Reassembly Tips – Smith & Wesson

When putting an S & W revolver back together, a few steps seem to cause more trouble than the rest. One is the insertion of the cylinder-locking bolt, and its spring, into the frame. The bolt has to go down its shaft, while the spring has to be squirmed back into the tunnel drilled into the front of the frame cutout. (I have no idea how they drill that hole.) With the frame resting on a padded surface, place the spring into its hole in the locking bolt. Start the bolt partway down the shaft until the spring bears against the edge of the frame. Use a small eyeglass screwdriver to compress the spring enough to clear the edge of the frame and push the bolt and spring down the shaft. When you get to the frame hole, the spring will snap into place. Be sure the bolt is completely down the shaft, and pivots smoothly up and down through the cutout under the cylinder.

Ruger GP-100 .357 Magnum No. KGP-141 Revolver

Ruger lists seven different models in the GP100 revolver family with barrel lengths of 3, 4, and 6 inches. Finishes are either blued or stainless steel. Manufacturer's suggested retail prices range from $552 for the .38 Special +P only models to $615 for the stainless steel .357 Magnum revolvers with barrel lengths of either 4 or 6 inches. All models come with a rubber grip complete with a rosewood insert. Our 4-inch barreled KGP-141 had a pleasing bright-stainless finish and an adjustable rear sight. Elevation was the familiar clockwise for down and counter clockwise for raising the point of impact. The windage adjustment required opposite movement for changing point of impact.

Ruger Redhawk KRH-444

Rugers $780 KRH-444 Redhawk was our top pick among three 4-inch .44 Magnum revolvers. Heres why. When Ruger engineers sought to make a more compact revolver, they did so by shortening the barrel and introducing a new grip. They left the frame alone. This meant the gun was plenty strong to take any punishment we could dish out.

Snubnose Revolvers from S&W And Ruger: Which One To Carry?

The 357 Magnum is an excellent defensive cartridge. Pair it with a lightweight, compact revolver, and that is what we would call an excellent choice as a conceal-carry handgun. Our team has tested variants of the Ruger SP101 and S&W Model 60, but the S&W Model 60 Pro Series in 357 Magnum is a variant we have wanted to get our hands on for a while. We also wanted to see if the caliber choice would sway our recommendation on the established Ruger SP101 model.

The second Ruger SP101 we tested was chambered in 327 Federal Magnum, which was cataloged by Ruger from 2007 to 2011. As we noted in our first look at the gun in the April 2008 issue, Ruger and Federal teamed up to produce a cartridge/handgun combination that provided the power of the 357 Magnum but with less recoil and in a compact revolver that holds six shots rather than five shots. As a bonus, the 327 Fed Mag-chambered Ruger also accepts 32 H&R Mag, 32 S&W, and 32 S&W Long ammo. The footprint of the Ruger SP101 in 327 Fed Mag is basically same as the Ruger SP101 in 357 Mag, with a few exceptions.

All three double-action revolvers are built from stainless steel with similar barrel lengths, give or take three-quarters of an inch. All had exposed hammers, so single-action firing is possible. A transfer bar was built into the revolvers for safety. All three were built to last, even under a steady diet of hot loads. The lock up was tight on all three, and the chambers were all aligned with the bore, which we assumed but also verified. Fit and finish was very good on all three revolvers and that was exactly what we expected. The workmanship in these guns make them worth the cost.

Weirdness in the Ammo Market

As the holidays arrive and we all think about buying presents for our loved ones, I wonder if we’ll have any money left over...
alert("Hello! I am an alert box!!");