Rifles

The American-made LCP II is built on a one-piece precision-machined anodized-aluminum chassis with integral frame rails and fire-control housing. Additional features include a through-hardened alloy steel slide; a black, one-piece glass-filled nylon grip frame; a textured grip frame to provide a secure and comfortable grip; a finger grip extension floorplate that can be added to the magazine for comfort and more secure grip, and a blued, alloy steel barrel. The LCP II ships with one 6-round magazine.

Germany has always been a leader in firearms development both for military and sporting use. The country also has a rich history of hunting. We wanted to take a look at two rifles with Teutonic hunting heritage, so we asked our dealers to wrangle up a Mauser M12 and Blaser R8. If there ever was an iconic bolt-action rifle on both sides of the Atlantic, it is the Mauser. Since 1871, Mauser has produced countless military and sporting bolt-action rifles. Mauser M98 rifles have been copied by many other rifle makers. Hallmark Mauser design features, like the action, three-position safety, and internal box magazine are built into rifles made by companies like Rigby, Winchester, CZ, Kimber, and others. The M12, however, is not a control-feed bolt action but is actually a push-feed bolt like a Remington, Sako, Weatherby, and others.

The Blaser (pronounced BLAH-zer) is a unique take on the bolt-action rifle because it uses a straight-pull bolt and offers interchange barrels in a range of calibers for gophers to elephants. Blazer had made a name for itself as an innovator of luxury hunting rifles, and though it could be debated that this German rifle is over engineered, we found some innovative features on a hunting rifle we didn't know we needed or wanted.

Either rifle would make an excellent deer rifle, we found, as well as top choices to take black bears, wild pigs, speed goats, and other hooved North American game. They both performed well in operation and in accuracy and after spending quality time with them, we can see why they command such a high price.

Both rifles were chambered in 30-06 Springfield, which is the benchmark caliber for American hunting cartridges. Our testers have a lot of experience with the cartridge, and we suspect that every bolt-action hunting rifle currently sold in the U.S. is available in 30-06. The round is versatile, easily found in stores, offers a range of bullet types and weights, and is at the upper level of tolerable recoil, especially when shooting the round out of lightweight hunting rifles. Both of these rifles hovered at seven pounds unscoped. For ammo in this test, we used Black Hills Gold loaded with a 180-grain Nosler AccuBond bullet and two hunting rounds from Hornady: Full Boar with a 165-grain GMX bullet and American Whitetail with a 150-grain InterLock bullet.

We mounted the rifles with the same optic, a SIG Tango6 2-12x40mm ($1600; CheaperThanDirt.com). This is a first focal plane-reticle scope, so the reticle increases and decreases in size as the magnification is increased or decreased. Testers liked this FFP scope because the milling reticle can be used at any magnification to estimate range. The Tango6 is equipped with an illuminated MOA Milling reticle. We could adjust reticle illumination as needed, and if we forgot to turn it off, the scope automatically turns off the illumination after six minutes of rest and powers back on as soon as it senses motion. We would have liked a parallax adjustment knob to really fine-tune the reticle, since we noticed the reticle moved ever so slightly as we moved our head and eye. Not a lot of movement, but enough to note. The scope also features Zerolock turrets, which means you can't lose zero if you rotate the turrets too much in either direction. Turret dials need to be pulled out to make adjustments then pushed back. Adjustments could be felt and seen easily, so getting our dope was simple after bore sighting. All adjustments were clearly marked, which we liked. The magnification ring used two fiber-optic dots that glowed to give the user a heads up on the magnification the scope was set at. Turrets and the magnification ring were toothy, with lots of texture, so rotating the dials was effortless. We could adjust the reticle easily while looking at it on target. For mid-range and typical hunting distances, we think the SIG scope would be a fine choice on these rifles. Where the bullet hits the paper is the real test of how well these rifles will do in the game field and deer stands. Here are the details on these luxury game getters.

Espionage novels and movies are filled with rifles that are transported in a brief case, quickly assembled, then used to fire incredibly accurate shots. But is the ability to transport a disassembled AR in a small case or knapsack more intriguing than practical? Couldn't an AR already be considered a takedown rifle? Can't you just disassemble the lower receiver from the upper receiver and tote the two pieces in a duffle bag? These were a few questions team members had as we started looking into takedown AR-15s.

On one side of the debate, a takedown AR can be discreetly carried without the normal gun case that announces to all what is inside. A takedown AR is something one might consider adding to his bug-out gear should flood, fire, or worse coming knocking on the door. Takedown ARs also have the ability to swap calibers, allowing a user to perhaps opt for 300 AAC Blackout on a pig hunt, use the 5.56mm NATO for home defense, and 9mm for low-cost training. This caliber-swap feature gives these ARs the ability to use whatever ammo is available at the moment. We've all experienced the ammunition shortages of the recent past, and there is no reason to think it won't happen again. These ARs can feed whatever ammo is available. Another plus on the takedown AR side is easier cleaning.

On the other side of the debate, parts that are assembled and reassembled wear faster than parts that are fixed, and the more complicated a design, the more likely it is to break and the harder it is to get spare parts. Also, we wondered how zero might shift when removing then replacing the same-caliber barrel? And, how would a different caliber affect point of impact? Of course, price is always a consideration, and the cost of these takedown ARs is high — more than four times the cost of an entry-level 5.56mm AR priced at about $550. Can't a shooter just buy two rifles and set them up with optics at the same cost or less?

To answer these and other questions, we gathered three models from DRD Tactical, Ruger, and Windham Weaponry. These manufacturers have taken the modularity characteristics of the AR to a new level, each offering its own unique takedown design. Operationally, the DRD and Windham are direct-gas-impingement models; the Ruger uses a piston system.

All in, these takedown rifles get smaller by separating the barrel from the rail, which we estimate as a reduction in length of about 8.5 inches. With all three takedown ARs, the rifle is broken down into three main components. One thing to note: The rails or handguards on these rifles are not compatible with aftermarket parts. You must use the handguard the AR is shipped with because it is a key part of the takedown design. You can, however, customize these ARs with other aftermarket parts like stocks, pistol grips, triggers, sights, controls, muzzle devices, and so on.

One can be spoiled by shooting accurate rifles, and accuracy typically comes at a cost. With the idea of finding a relatively inexpensive rifle that shoots accurately, is consistent, and is easy and comfortable to use, we looked into new rifles from Mossberg, the MVP LR, $945; and from Howa, the Alpine Mountain Package $1577. These two new rifles are both chambered in 308 Win./7.62x51mm NATO and are positioned by their manufacturers to do very different tasks. Even so, the shooter who prizes hole-in-hole performance will be challenged picking between these two because of the inherent trade-offs they present.

The Howa was designed to be a lightweight hunter, and the Mossberg's intent is to shoot accurately at long range. We feel both rifles accomplish their intended purpose, but as you will see, we found a potential pitfall in the Howa's magazine release, and with the Mossberg, we found we wanted better accuracy and a little better set-up for long range. With that said, both of these rifles had sub-MOA accuracy. We were surprised at the accuracy of the Howa and actually expected better accuracy out of the MVP LR, but at the end of testing we were satisfied, but not elated, with the results we achieved with both rifles.

We test-fired both rifles using a sandbag rest, mechanical rifle rest, and bipod in the prone and off a bench at target sets at 100 yards. The firing sequence consisted of five shots. Then we allowed the barrel to cool and changed ammo brand and fired another 5-shot string. Ammunition consisted of a range of bullet weights: Aguila 150-grain FMJ-BT, Hornady Match 178-grain BTHP, and Black Hills 168-grain BTHP. We also increased consecutive shot strings to 10 rounds to see the effect of a hot barrel on accuracy.

The variables in the test were the scopes. The Howa came with a Vortex Viper 3-9x40mm scope. The Viper scope is a traditional hunting scope with screw-on turret caps. With the caps removed, the turrets are pulled up to adjust windage and elevation. The magnification ring is large and easily rotated without disrupting aim. A Dead-Hold BDC reticle is in the second focal plane, so the reticle stays the same size even when magnification is increased or decreased. Subtensions on the reticle can be used to judge holdover for elevation and wind adjustments, but the scope needs to be on the highest magnification setting. We saw a bit of parallax at distances past 100 yards, but for hunting purposes, we could easily live with it. This is a basic scope, and we thought it was a good pairing with the Howa. Initially, we also thought this scope might be a liability compared to the scope we used on the Mossberg, but the little Howa kept pace with the Mossberg from the bench, so the optic wasn't a liability at all.

On the Mossberg LR, we mounted a Meopta ZD 6-24x56mm RD ($2070; MeoptaSportsOptics.com), which is specifically designed for long-range shooting. The Meopta features an illuminated MilDot II reticle with an integrated range finder and is calibrated for tactical calibers like 7.62x51mm NATO/308 Win., 338 Lapua Mag. and 50 BMG/12.7x99mm NATO. The MilDot II RD reticle is located in the second focal plane, and when the magnification is set at 12x, the reticle subtensions can be used for windage and elevation adjustments and range finding. The scope has finger-adjustable windage and elevation turrets; one click for every quarter-minute. Clicks are tactile and audible. We used Weaver Tactical rings and the Picatinny style rail that came with the Mossberg. After bore sighting, the Meopta was easy to zero. We found adjusting the reticle for parallax to be simple, and it showed a clear sight picture all the way to the edges of glass. We really liked this scope, though some would have wanted the reticle in the first focal plane, but all agreed it was well suited for long range work. Here are the details on how these 308 bolt guns shot with these optics.

Last month, we began testing AK-pattern rifles built in the U.S., which itself is important to a lot of Gun Tests readers, but also because we wanted to take an in-depth look at the category of what we hoped might be "improved" domestic variants of this famous rifle. Over the years, we've admired various AKs for their reliability while we've criticized their accuracy, fit and finish, and shooter-experience packages, such as crappy triggers and uncomfortable stocks. That said, we were very pleased with three rifles we tested in the June issue, rating one as a Grade A gun (Palmetto State Armory AK-47 MOE Edition 7.62x39mm, $749), a second as a Grade A- rifle (Century Arms RAS47 Magpul-Zhukov 7.62x39mm, $800), and the third a B+ (Palmetto State Armory AK-47 Gen2 Classic Red 7.62x39mm, $849).

This time we pit what are probably the two most significant military rifle actions of the 20th century against each other, the Kalashnikov and the Stoner. But there is a twist: All four rifles are American made, are chambered in 7.62x39, and use Kalashnikov-pattern magazines. The two Kalashnikov actions are made by Century Arms and look very much like standard AK-pattern rifles. The two Stoner actions, made by Rock River Arms and CMMG, for the most part look like the AR-15 platform familiar to many shooters but have some unique features. The Kalashnikovs have a well-deserved reputation for reliability, and the Stoners have a well-deserved reputation for accuracy. So, how would they do head to head?

To find out, we fired all four rifles in both cold and hot conditions, and because we expect these rifles to be used both as plinkers and for hunting or rural self defense, we used four different types of ammunition for this test: 122-grain FMJs, 123-grain plastic-tipped hollowpoints, 124-grain soft points, and 154-grain soft points. Due to the fairly big groups shot with open sights at 100 yards last time, this round we fired five-shot groups at 50 yards and measured them from center to center. Here's what we learned.

At one time AKs were made from de-milled parts kits or shipped into the U.S., then rebuilt with a specific number of U.S. parts to make it 922r compliant, and they still are today. But depending on what company remanufactured the rifle, the rifle might look like an AK-47 semi-automatic, but not work like one. In recent years the cost and availability of quality AKs have gone up and good ones can sometimes be difficult to acquire.

Two U.S. manufacturers, however, have seen the need to fill shooters' demands for a well-made AK-47 that has all the durability of the iconic rifle and at a reasonable cost.

It seems an oxymoron to say "American-made AK," but Century Arms and Palmetto State Armory (PSA) are building AK-47s out of 100-percent U.S.-made parts. These are not former military or new import weapons made 922r compliant, but truly U.S.-made AK rifles built in Vermont by Century and in South Carolina by PSA. The two companies designed their rifles using an amalgamation of AK designs from a variety of countries including Russia, Bulgaria, Yugoslavia, Romania, China, and others, taking what was best and incorporating the good ideas into the domestic designs.

[IMGCAP(1)]

We wanted to look at this new breed of American AK, so we scrounged up a pair of Palmetto State Armory rifles and a Century rifle. The rifles ranged from two that were set up with modern Magpul polymer furniture and a third with a more traditional wood appointments.

The AK-47 was designed and prototyped in 1947 and adopted by the Soviet Union in 1949. The design actually borrows from the M1 Garand and German Sturmgewehr StG 44, both of which were issued in WWII. The M1 Garand saw extensive service with G.I.s, while the StG 44 saw limited service when it began to be issued in 1943. The AK design incorporates a long-stroke gas piston and rotary bolt. The idea behind the AK-47 was to design a weapon that was reliable, durable, simple to maintain, relatively accurate, and inexpensive to manufacture. The AK-47 meets all those criteria hands down. Like the StG 44 and M1 Carbine, the AK-47 was a turning point in military weaponry. Shorter, more compact weapons with close to mid-range accuracy was the way wars were being fought. Heavy, large-caliber rifles were not as effective. The AK-47 shoots the 7.62x39mm cartridge, which was also influenced by other countries, namely the cartridge used in the German StG 44, the 7.92x33mm Kurz, and the U.S. M1 carbine in 30 Carbine. In terms of power and trajectory the 7.62x39mm is similar to the venerable 30-30 Winchester.

Some AK characteristics that U.S. shooters need to get used to is the bolt does not lock back on the last shot fired; the safety is a large lever located on the right side of receiver; magazines need to be rotated and locked in place; and the magazine may need to be stripped away, as some magazines fall free when the magazine is released and some do not. The open sights on all AKs, even these three, looked slightly bent. The sights were perfectly zeroed, but slightly bent sights are another characteristic U.S. shooters must acclimate to. The three rifles tested all used stamped receivers, which was what the original AK design called for. Milled receivers were used in the interim. Century offers a line of milled-receiver AKs in the C39v2 line. Milled receivers offer less flex than stamped receivers during recoil, which can aid in accuracy. Milled receivers are also heavier, so felt recoil is lessened. Milled receivers are also more expensive compared to stamped receiver models.

There can be strong opinions about AK-47s from U.S. shooters, but the fact is the AK is probably the most prolific combat rifle currently fielded. One of our team members who is a Gulf War veteran said if he could have only one gun it would be an AK-47 due to the rifle's reliability and the better terminal ballistics of 7.62x39mm compared to the 5.56x45mm NATO/223 Remington. Yes, there is more recoil with the Russian cartridge, and it is not as accurate as the 5.56/223, but it has more power, and typical accuracy is 4 minutes of angle (MOA), which is plenty accurate for defensive purposes and hunting at moderate distances. We also had diehard AR fans in our test group who gained a respect for the AK platform. In terms of performance, there was nothing lost in translation with these AKs as testers grew a little more tolerant.

We fired the three AKs using open sights, with some members using a Strike Hard (StrikeHardGear.com) AK chest rig. The rig uses an x-harness and holds four magazines with a shock cord retention system. The weight of fully loaded magazines is comfortable with the rig. Here are the details about how each rifle performed during our head-to-head testing.

Putting new calibers in old designs is a popular trend, proving you can teach an old dog new tricks. In this test we look at the classic AK-47 platform chambered in 5.56x45mm to see if the new trick would fit the old dog. Matching a new rifle to an old favorite in caliber means keeping fewer types of ammo around the house, so we wondered how the AK would perform with the smaller 5.56mm NATO round to match our favorite AR platforms. Many AR and M4 variants are now available in a range of chambers, from 22-caliber plinkers to 300 Blackout and most things in between, including 7.62x39mm, so this switch works both ways if you want it to. We recently found two AK-styled rifles chambered in 5.56 NATO that we could perhaps upgrade into something better, if the base rifle functioned well enough to consider making the initial investment. Depending on their performance, these two AK-47 variants chambered in the NATO 5.56x45 round might be nice additions to a collection and would make a great companion to an AR in the same caliber.

We found a Polish Archer, imported by I.O. Interordnance, and an Izhmash Saiga Sport, imported by TGI, Inc., of Knoxville, Tennessee, to compete in a head-to-head contest of fit, form, and function, with considerations toward making modifications. Here's what we learned.

At the 2016 SHOT Show in Las Vegas, Gun Tests staffers ran across many dozens of new products that we're working to include in future tests. Following are some of the rifles, rifle ammunition, shotguns, and long-gun accessories we found interesting. If there's something in particular you want us to test, please drop me a note at GunTestsEditor@icloud.com.

Barnes Bullets has added two new loads to the VOR-TX line of premium ammunition. The first is a 130-grain Tipped Triple Shock load for the 308 Winchester. It is rated at 3,170 fps, and it takes the 308 Winchester into a new realm of velocity. SRP: $45.69 for a 20-round box. The second load is an 190-grain LRX bullet for the 300 Winchester Magnum. This bullet's ogive and cannelure design gives it a high B.C., and the nose cavity engineering ensures it expands reliably at lower velocities. It is rated at 2,860 fps.

The Woodsman rifle is new from Bergara. This bolt-action hunting rifle weighs 7.4 pounds in long action and 7.1 pounds in short action. It has a hinged floor plate and comes with a 22- or 24-inch, No. 3 contour barrel. The stock is American walnut, and available chamberings include 6.5 Creedmoor, 7mm Rem. Mag., 308 Win., 30/06, and 300 Win. Mag.

Browning's biggest shotgun news is that the Sweet Sixteen is back. Like its most revered predecessor, the new A5 Sweet Sixteen is built on a smaller, lighter receiver for reduced weight and a sleek feel. The A5 uses kinetic energy to power the recoil-operated Kinematic Drive System for reliable function with any load and under the full extremes of weather, temperature, moisture, or grime. The A5 16-gauge receiver is constructed of aluminum with a black anodized bi-tone finish. The stock—shim-adjustable for length of pull, cast, and drop—and forearm are gloss finish walnut with a close-radius pistol grip and sharp 18 lines-per-inch checkering. The gun uses Browning's Invector DS choke system; three chokes will be supplied with 2 -inch chambered barrels in 26- or 28-inch lengths. Weight: 5 pounds 12 ounces.

We admire long-range competitive shooters for doing something we mere shooting mortals find nearly impossible. Their ability to manage distance, wind, and overly complicated reticles on specialized rifles to deliver hits on targets that can hardly be seen with the naked eye is both an art and science. Usually a precision centerfire rifle is custom-made, costing upwards of $3,000 or more with a wait time that can take years, depending on the popularity of the custom-rifle builder. Adding a suitable optic can increase the cost an additional $1,000 to $2,000, plus bipod and other pieces of gear, not to mention quality ammo. All in, a shooter could easily sink $7,000 into a set up before even sending a single piece of lead downrange.

Firearm manufacturers, seeing the shooting public's interest in long-range shooting, are offering rifles advertised as "tactical" and "precision" to attract long-range hunters and weekend paper punchers. We all know that setting a barreled action in a black polymer stock does not make a precision rifle. But lately, some large firearm manufacturers have begun mass-producing accurate rifles that rival some custom-built rifles without the wait or the high cost. These mass-produced precision rifles can handle many long-range chores, and some of them come in compact lengths and have the ability to add muzzle devices, such as suppressors.

We wanted to take a look at a few of these rifles to get a sense of their accuracy as well as their consistency, ease of use, ability to be customized, and cost. We began looking at such rifles in the January 2016 issue when we compared three bolt actions from Savage, Ruger, and Howa, all chambered in the very accurate 6.5 Creedmoor round. Our favorite in that test was the Savage Arms Model 12 Long Range Precision 19137, followed by the Ruger Precision Rifle 18005 and the Howa HB HKF92507KH+AB. Here we take a second look at the Ruger Precision rifle, this time in 308 Winchester, against a Tikka T3 CTR. The 308 Win. is a common and popular round, with many factory ammunition options available. We tried the spectrum of 308 Win. ammunition and bullet weights, from inexpensive Sellier & Bellot 150-grain soft-point hunting rounds and Norma USA's 168-grain Sierra hollowpoint boattail to expensive 175-grain boattail Sierra MatchKing hollowpoints in the Federal Premium Gold Medal match ammo line, as well as Hornady 155-grain TAP FPDs. Both rifles were fired from a sandbag rest as well as from seated and prone positions. We also made sure the temperature, wind speed, and humidity conditions were similar when we shot these rifles, even though these factors have more affect on targets at farther distances than the distance tested. Barrels were allowed to cool after each string.

Test firing was conducted at 100 yards, though that distance may seem short compared to what these rifles' makers say the products can do. This is the most common rifle-range distance many shooters have access to. Members of this particular test team had experience with high-end SIG Sauer SSG 3000 and Sako TRG M10 and TRG 42 rifles, and numerous chassis-style rifles with Remington, Savage, and custom-rifle-maker barreled actions, as well as long-range hunting rifles like the Savage 11/111 models and Remington Model 700 varmint rifles. A Leupold Mark 4 4.5-14x50mm LR/T scope (Brownells.com, $900, #526-000-150WB) was moved between rifles Warne Maxima-series steel rings to ensure there was no optic variability. The Mark 4 series has been used by the U.S. Marine Corps on the M14 rifle and with the U.S. Army's M24 sniper weapon system. One might consider it to be a benchmark in tactical scopes. It is made with a one-piece 30mm tube and a 50mm objective. The M1 TMR (Tactical Milling Reticle) reticle is located in the second focal plane, so it stays one size even as the magnification power is increased. To use the Mil-Dot ranging features, the scope must be set to the highest magnification. We bore-sighted the rifles prior to starting range work. Here's what our shooters found out at the range.

Recently, a Gun Tests reader requested that we gauge the accuracy of 7.62x39mm loads in the AK-47 rifle, with an eye toward evaluating the AK for ad hoc hunting, if the opportunity arose. Many of these rifles are in use in America, so determining the ability of the rifle to humanely harvest a deer or hog seemed like a good idea to check out. The 7.62x39mm cartridge is often compared to the 30-30 Winchester in power, and if the AK-47 and its loads were accurate enough, then the pair could be counted upon to take thin-skinned game at moderate distance.

The question is, how accurate is commonly available ammunition in an average AK-47 at 100 yards? To find out, we obtained an AK-47 from the used rack at a pawn shop. The rifle featured an NDS receiver and seemed well put together. While we were there, we also grabbed an SKS chambered for the same round, in this case a Chinese rifle in excellent condition with matching serial numbers on its parts.

Benchresting the AK and its long magazine produced some difficulties. We found it is not an easy rifle from which to coax accuracy. The SKS was easier to use well off the bench, especially when using the onboard iron sights. After initial sighting work at 50 yards to get on the paper, we fired a succession of three-shot groups at 100 yards, sighting both at the base of an 8-inch bull. At the end, we found the SKS to be slightly more accurate with the ammo we selected.

In broad terms, then, we think most shooters can get commonly available AK-47s to shoot around 4-inch groups at 100 yards, good enough to take game at that distance. We had slightly better results with the SKS, and would think of it as a 3.5-inch gun at that range. Also, we found a few rounds these guns preferred, so if you're attempting to knock a hog in the head, you might consider starting with our winners in your own AK or SKS. Following are our ratings for eight ammunition choices suitable for the AK-47 or SKS variants, and you can also scan the results in the accompanying table.

Sturm, Ruger & Co., Inc. has announced a new line of full-size duty pistols, new chamberings for its GP100 revolvers, new barrels for its 10/22 Takedowns, and new colors for its Lite rimfire pistols. Also, the company has added a Takedown rifle to its SR-556 line. The Ruger American Pistol will be available in 9mm Luger and .45 Auto. The two 9mms are Model Nos. 8605 (17+1) and 8607 (10+1) and the 45 is Model No. 8615, and all will list for $579 MSRP.

The Ruger American Pistol is built on a one-piece precision-machined stainless-steel chassis with integral frame rails and fire control housing. It has a black nitrided finish, Novak LoMount Carry three-dot sights, a stainless steel slide with non-reflective black-nitride finish, and a one-piece glass-filled nylon grip frame. The front accepts accessories on a mil-standard 1913 rail.

"The Ruger American Pistol is the most advanced semi-auto pistol we have ever produced," noted Ruger CEO Mike Fifer.

The 9mm weighs in at 30 ounces with a 4.2-inch barrel and the .45 weighs in at 31.5 ounces with a 4.5-inch barrel. Both ship in a hard case with replaceable grip modules and two, nickel-Teflon plated steel magazines. Capacities are 17 rounds for 9mm and 10 rounds for .45 Auto. 10-round magazines are also available for the 9mm for those states which restrict round counts.

CEO Fifer said that Ruger polled law enforcement and military trainers throughout the country to determine the form, function, and features of this firearm. The new pistol combines a recoil-reducing barrel cam to spread recoil over time, a low-mass slide, low center of gravity and a low bore axis to provide better balance, less felt recoil and less muzzle flip.

The POF USA Gen3 P308-20 was 42 inches long with a 20-inch fluted barrel tipped with a custom triple-port muzzle brake. On top was a sleek monolithic rail stretching 14 inches in length. A MagPul PRS adjustable buttstock met the shooter's shoulder. The team agreed the rifle felt strong and hefty, and they were pleased with the overall feel. It was well balanced, the metal finishes and coatings were uniform and looked very nice. The mill work on the billet upper and lower receiver was well done.

The receivers fit tightly together and didn't rattle. However, there was an obvious gap at the rear mating of the receivers. The rear and front takedown pins fit and functioned properly with no grinding needed. The upper receiver was equipped with forward assist. The charging handle and bolt-carrier group slid out of the receiver smoothly. The charging handle was machined billet and anodized.

The bolt carrier group was impressive, a custom design by POF-USA that requires little to no lubrication because of a nickel-Teflon plating. It was integrally keyed and uses a custom-designed roller-cam pin that was also NP3 coated. The bolt was chrome plated and heat-treated to mil-spec standards. Disassembly and lubrication were simple to perform, and POF-USA recommends additional lubrication of these parts during break-in.